No Image
Incubators (GTI-001)

Incubators are sturdy, with double walled construction with complete innerchamber made of Anodized Aluminium or Highly Polished Stainless Steel.Outer chamber is made of Mild Steel Sheet, finished with powder coated paint. 75 mm gap between the walls is filled with special grade glass wool for proper insulation and to avoid heat losses. Inner chamber fabricated with ribs for adjusting shelves to convenient height. Supplied with 2 or 3 removable shelves. SHELVES are made of fully Anodized Aluminium Sheet or Polished Stainless Steel Sheet as per chamber. Door is insulated & fitted with
heavy hinges. Door has Double glass window which facilitate inspection of samples without opening the door. Heating elements, made of high grade imported nichrome wire are put inside the porcelain beads and placed at the bottom and side ribs for uniform temperature all over the space.


Temperature is controlled by imported capillary type thermostat from ambient to 80°C. Temperature control knob is graduated in centigrade degrees after actually observing the temperature in steady state. An L-shaped prismatic glass Thermometer is fitted on top of the Incubator for reading the chamber temperature.


The equipment is provided with a panel having a thermostat control knob, ON/OFF switch and two pilot lamps. Power Requirement: – Supplied with cord and plug suitable to operate on 220 V single phase, 50 Hz, AC supply.

Size of Inner Chamber W X H X D CAPACITY NO. OF SHELVES
300 X 300 X 300mm 28 litre 2
355 X 355 X 355mm 45 litre 2
455 X 455 X 455mm 95 litre 2
455 X 605 X 455mm 195 litre 3
Privacy Policy | Disclaimer
All Rights Reserved ,
Genist Technocracy Pvt. Ltd.